Table of Contents
Advertisement
1
Figure 8.4:
Device aligned with the marking
Press the escape button
If necessary, teach-in the position for fine adjustment; see chapter 8.3.
Calibrate the device for the current check program with the webConfig tool; see chapter 9.3.5 "Calibrat-
ing".
8.3
Teaching-in the position
For fine adjustment and, alternatively, for exact mechanical alignment via the
user can teach-in the position of the device via the display.
While teaching-in the position (teach), a position correction of the coordinate system of the capture range
is performed.
Teaching-in of the position is performed separately for each distance.
Reteaching of the position is not performed for a different hole geometry or for different exposure/
focal settings.
NOTICE
Align the device before teaching-in the position!
The device must be roughly aligned before teaching-in the position.
The capture range must not exit the field of view.
Rack Near
For the
as the capture range.
Use the navigation buttons
the enter button
To teach the position for the current alignment, the marking (hole or reflector) must be located within the
capture range; see figure 8.3.
Service
In
mode, select
Select the distance for teaching-in (
Teach-in
Select the
Teach-in
Select
Teach-in
If the
menu option is crossed out in the
Mechanically realign the device; see chapter 8.2 "Mechanically aligning the device via the display".
Possible causes:
• The marking is not in the capture range of the device.
• The limits of the new capture range ascertained by teaching in are not completely in the field of view.
Commissioning
Exit the
To do this, press the Escape button
Leuze electronic
1
Marking indicator
Service
to exit
ESC
distance, the teach range is nearly zero since the field of view is almost the same
.
Commissioning
Rack Near
menu.
.
menu.
mode.
to move through the menu. Activate the desired selection with
.
Rack Far
or
).
Teach-in
menu, teaching-in of the position is not possible.
.
ESC
LSIS 472i
Commissioning
Commissioning
menu, the
27
Advertisement
Table of Contents
