9.3.12 Activating Display Of The Target/Actual Deviation In The Display - Leuze electronic LSIS 472i Series Operating Instructions Manual

Figure 9.14: Switching of the switching outputs

9.3.12 Activating display of the target/actual deviation in the display

In order for the target/actual deviation for the marking to be shown in the display, the output must be acti-
vated via the Ethernet interface.
CONFIGURATION > PROGRAMS
 Select
 Select the active check program (
CONFIGURATION > PROGRAM > Tools > Output > Display
 Select
TOOL CONFIGURATION - Display
The
Leuze electronic
Extended configuration – Leuze electronic webConfig tool
.
Rack Near Rack Far
or ).
dialog is displayed.
LSIS 472i
.
41