Table of Contents
Advertisement
Make the following entries:
IP address:
•
Port number:
•
Standard setting: port 21
User name:
•
Password:
•
only necessary if required by the FTP server for login.
Fault image output at reading gate end
Select the
FTP activated
Select the
Settings for the FTP connection
NOTICE
Ensure availability of the FTP server
Ensure the availability of your FTP server. If no FTP connection can be established, the device outputs
warning messages repeatedly.
CONFIGURATION > PROGRAMS
Select
Select the active check program (
CONFIGURATION > PROGRAM > Tools > Output > FTP
Select
TOOL CONFIGURATION - FTP
The
TOOL CONFIGURATION - FTP
Figure 9.17:
Output activated
Select the
Click on the [Settings] button.
Leuze electronic
IP address of the FTP server with which the connection is to be established.
port number of the FTP server with which the connection is to be established.
freely selectable user name. The device logs into the FTP server with this user name.
checkbox.
Rack Near
dialog is displayed.
checkbox.
Extended configuration – Leuze electronic webConfig tool
checkbox.
.
Rack Far
or
).
.
dialog
LSIS 472i
43
Advertisement
Table of Contents
