Tool configuration – Offset
Figure 9.6:
9.3.6
Configuring image acquisition
As an alternative to configuring compartment fine positioning for faster commissioning (see chapter 9.3.4),
you can make the configuration settings for compartment fine positioning manually.
CONFIGURATION > PROGRAMS
Select
Select the active check program (
CONFIGURATION > PROGRAM > Tools > Image acquisition
Select
Image acquisition – Attributes
The
Image acquisition – Attributes
Figure 9.7:
Set the image acquisition attributes according to the requirements of the application.
Leuze electronic
Extended configuration – Leuze electronic webConfig tool
dialog
.
Rack Near
Rack Far
or
dialog is displayed.
dialog
LSIS 472i
).
.
35