Page 1
KLS-1 20 Compact Light Set Bedienungsanleitung User manual LED KLS-120 Compact Light Set Komplette DMX-LED-Lichtanlage Complete DMX LED light set (optional) STAND MASTER REMOTE RGBW 18° SLAVE ALONE CONTROL STROBE No. 42109606 www.eurolite.de...
Diese Bedienungsanleitung gilt für die Artikelnummer / This user manual is valid for the article number: 42109606 Das neueste Update dieser Bedienungsanleitung finden Sie im Internet unter: You can find the latest update of this user manual in the Internet under: www.eurolite.de...
• Geschwindigkeit, Dimmer, Musiksteuerung, Master/Slave-Betrieb Adressierung und Einstellungen über Steuereinheit mit 4-stelliger LED-Anzeige • Zusätzliche Steuermöglichkeit über EUROLITE IR-7 Fernsteuerung, im Lieferumfang enthalten • Schwarz lackierte Metallausführung mit schwenkbarem Montagebügel der Spots • Reine Konvektionskühlung über Kühlrippen, keine Lüfter, besonders leise im Betrieb •...
SICHERHEITSHINWEISE WARNUNG! Lesen Sie aufmerksam die Sicherheitshinweise und benutzen Sie das Produkt nur wie in dieser Anleitung beschrieben, damit es nicht versehentlich zu Verletzungen oder Schäden kommt. Verwendungszweck • Bei diesem Gerät handelt es sich um eine LED-Kompakt-Lichtset, mit dem sich dekorative Lichteffekte erzeugen lassen.
Page 6
Warnung vor Verbrennung und Brand • Der zulässige Umgebungstemperaturbereich (Ta) beträgt -5 bis +45 °C. Verwenden Sie das Gerät niemals außerhalb dieses Temperaturbereichs. • Die Gehäusetemperatur (Tc) kann im Betrieb bis zu 50 °C betragen. Vermeiden Sie den Kontakt mit Personen oder Gegenständen.
INSTALLATION Überkopfmontage WARNUNG! Verletzungsgefahr durch Herabfallen Über Kopf installierte Geräte können beim Herabstürzen erhebliche Verletzungen verursachen! Stellen Sie sicher, dass das Gerät sicher installiert ist und nicht herunterfallen kann. Die Montage darf nur durch eine Fachkraft erfolgen, die mit den Gefahren und den einschlägigen Vorschriften hierfür vertraut ist.
Stativmontage Für den mobilen Einsatz setzen Sie das Gerät über die Hülse auf ein Stativ auf und fixieren es mit der Feststellschraube. Passende Stative finden Sie im Kapitel Zubehör. Hinweise: • Bitte achten Sie beim Aufbringen der Last auf eine gleichmäßige Lastverteilung und überschreiten Sie nicht die Traglast des Stativs.
Betriebsart. Nehmen Sie nun die notwendigen Menüeinstellungen für die jeweilige Betriebsart mit den Bedientasten vor. Auch wenn Sie das Gerät vom Stromnetz trennen, bleiben alle Einstellungen gespeichert. Das Gerät kann entweder im Standalone-Modus über das Bedienfeld und die Fernbedienung EUROLITE IR-7 oder im DMX-gesteuerten Modus über einen handelsüblichen DMX-Controller betrieben werden.
Menüstruktur Anzeige Modus Funktion 19CH d001-512 19-Kanal-Modus und Startadresse 16CH d001-512 16-Kanal-Modus und Startadresse DMX-Betrieb Addr d001-512 7-Kanal-Modus und Startadresse d001-512 4-Kanal-Modus und Startadresse Farbvoreinstellungen Stat S 01 – S 19 Konstantes Leuchten in einer von 19 Farben Automatikbetrieb Auto Au01 –...
Page 12
Drücken Sie die Taste MENU so oft, bis das Display SPEd anzeigt. Bestätigen Sie mit der Taste ENTER. Stellen Sie mit den Tasten UP und DOWN die Ablaufgeschwindigkeit des Programms von SP 01 (langsam) bis SP 09 (schnell) ein. Bestätigen Sie mit der Taste ENTER. Drücken Sie die Taste MENU so oft, bis das Display SEnS anzeigt.
Fernbedienung IR-7 Das Gerät muss für die Ansteuerung per Fernbedienung aktiviert werden. Wählen Sie dazu im Menüpunkt InFr die Einstellung on. Halten Sie beim Betätigen einer Taste die Fernbedienung immer in Richtung des Sensors auf der Gerätevorderseite. Zwischen Fernbedienung und Sensor muss Sichtverbindung bestehen. In der DMX- und der Slave-Betriebsart sind die Funktionen der Fernbedienung deaktiviert.
DMX-Betrieb Anzahl der DMX-Kanäle und DMX-Startadresse einstellen Für den Betrieb über einen Controller mit DMX512-Protokoll verfügt das Gerät über 19 Steuerkanäle. Es kann aber auch in einen Modus mit 4, 7 oder 16 Kanälen umgeschaltet werden, wenn andere Funktionen benötigt werden. Damit das Gerät vom Controller angesteuert werden kann, muss außerdem die DMX- Startadresse eingestellt werden.
Page 16
190 - 255 Alle an 000 – 009 Keine Funktion 010 – 039 Auto Programm 1 040 – 069 Auto Programm 2 070 – 099 Auto Programm 3 Auto- und 100 – 129 Auto Programm 4 Soundprogramme 130 – 159 Musikgesteuertes Programm 1 160 –...
• dimmer, sound-control, Master/Slave operation Addressing and setting via control panel with 4-digit LED display • Additional controlling possibility via the EUROLITE IR-7 remote control, included in delivery • Black or white lacquered metal version with movable mounting bracket •...
SAFETY INSTRUCTIONS WARNING! Please read the safety warnings carefully and only use the product as described in this manual to avoid accidental injury or damage. Intended use • This device is a LED Compact light set for creating decorative lighting effects. This device is designed for professional use in the field of event technology, e.g.
Page 22
Warning – risk of burns and fire • The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range. • The housing temperature (Tc) can be up to 50°C during use. Avoid contact by persons and materials. •...
DESCRIPTION OF THE DEVICE Front (1) Thread for mounting a truss clamp (5) Fixation screws (2) Rubber feet (6) Stand sleeve with fixation screw (3) Infrared sensor for the remote control (7) Spots with RGBW LEDs (4) Mounting bracket Fixation screws Rear 14 15 (8) Microphone...
INSTALLATION Overhead rigging WARNING! Risk of injury caused by falling objects Devices in overhead installations may cause severe injuries when crashing down. Make sure that the device is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations.
Mounting on a stand For mobile use, place the light set on a stand via the sleeve and fasten the fixation screw. Suitable stands can be found in chapter Accessories. Notes: • Please make sure the load is installed in a balanced way and the carrying capacity of the stand is not exceeded.
The operating modes can be selected by means of the display and the control buttons. All settings remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any commercial DMX controller.
Menu structure Display Mode Function 19CH d001-512 19-channel mode and start address 16CH d001-512 16-channel mode and start address DMX mode Addr d001-512 7-channel mode and start address d001-512 4-channel mode and start address Preset colors Stat S 01 – S 19 Constant lighting in one of 19 colors Automatic mode Auto...
Page 28
Sound control Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the music (sufficient bass provided). Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER button.
Remote control IR-7 The device must be activated for remote control. For this, set menu item InFr to on. When actuating a button, always direct the remote control towards the sensor. There must be no obstacles between remote control and the sensor. Button Function BLACKOUT...
Page 30
Note: Please make sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX chain. If several devices are addressed similarly, they will work synchronically. Each QCL spot can be individually controlled with the following DMX protocol. The spot succession is arranged as shown in the graphic below.
Page 31
100 – 129 Auto program 4 130 – 159 Sound control program 1 160 – 189 Sound control program 2 190 – 219 Sound control program 3 220 – 255 Sound control program 4 7-channel mode Channel Value Function 000 - 255 Increasing brightness 0 –...
Page 32
16-channel mode Channel Value Function 000 – 255 Red (0 – 100%) 000 – 255 Green (0 – 100%) Spot 1 000 – 255 Blue (0 – 100%) 000 – 255 White (0 – 100%) 000 – 255 Red (0 – 100%) 000 –...
CLEANING AND MAINTENANCE The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness. Disconnect the device from power and allow it to cool before cleaning. Clean the surface with a soft lint-free and moistened cloth.
TECHNICAL SPECIFICATIONS Power consumption: 30 W Protection class: IP classification: IP20 Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug Power output: IEC connector (F) mounting version Fuse: T time-lag, 1 A Fuse replaceable LED: 12 x high-power 8 W 4in1 QCL RGBW (homogenous color mix)