Advertisement
(The actual information sent by the Receiver and its format is shown in the discussion
on RA6790/GM HF Receiver responses to remote control commands.)
",.,' commands result in selected data being sent back to the remote control device.
EXAMPLE 3:
The commands $99 TFCR will result in only frequency and summary-status data being
sent to the remote control device.
- .
",.," commands include':
TF - requests frequency data only.
TD - requests detector mode data only.
Tl _ requests IF bandwidth data only (non-functional in ISB mode).
TM - requests IF gain control mode data only.
TB _ requests BFO data only (functional only when Receiver is in BFO variable).
T A _ requests IF gain control attenuation data only (functional only when Receiver is
under manual IF gain control or AGC with manual threshold).
Several ",.,' commands may be sent to the Receiver at once by listing the desired infor-
mation characters after only one "T".
EXAMPLE 4:
$99TFDICR would result in frequency detector mode, bandwidth and summary status
information being sent back to the remote control device.
Change 3
3-24.1
.
...
Advertisement
