Advertisement
TM-2
..
Table B-1.
Command and Monitor Data and Format (Cont.)
The overr ide mode is invoked when both detector and bandwidth are
sent in the same command with the ... sign.
Sending either without the equals
stores the
=
data but leaves the receiver in the modal command mode.
L •.
AGC Level Return (R30).
This number is appended to all Status returns ·and is in the' range
0.-..
(Minimum Signal) to 150 (Maximum Signal).
It is sent to the remote controller
regardless
of
the AGC mode
setting,
i.e.,
whether
in MAN,
SijORT or any
combination of the same.
B-10
Advertisement
