Introduction; About This Manual - Bartell Innovatech Terminator Infinity 2.0 Manual

®
The Terminator Carpet and Tile Removal Machine is intended for use on large demolition
and asbestos abatement projects as well as smaller floor covering removal jobs. Designed
and built by experienced floor covering demolition and installation experts, the machine
incorporates several design features that are essential for efficient operation:
• Tricycle wheelbase and short turning radius allows for better turning ability - especially
in narrow spaces.
• Jaw position and tool position adjustments allow for changing the angle of the blade for
any application.
• Weight package options in the front and rear provide extra traction needed for tile and
glue removal.
• Built-in forklift transportation slots allow for easy loading and unloading at job sites.
If operated and cared for as instructed in this Manual, the Terminator
free, safe, and efficient performance.
This Manual contains the information and procedures to assist you to operate and maintain
®
the Terminator machine safely and correctly. Read this Manual before you operate or
service the equipment. If you need additional information or assistance, please get in touch
with our Customer Service Department:
Innovatech Products & Equipment Co.
4701 Allmond Ave
Louisville, KY 40209
(425) 402-1881 or 800-267-6682
Fax (425) 402-8547
Email: service@InnovatechProducts.com
NOTE: Throughout this Manual directional instructions (left, right, up, down, push, pull, etc.)
are given from the point of view of the operator performing the action.

1. Introduction

2. About This Manual

P a g e
®
provides trouble-
OIPB-I01029-Infinity2.0_v1.2
| 6