Table of Contents
Advertisement
completely.
★the indicate bulb: 12V 100WHAL high brightness halogen bulb (OSRAM)
★the fuse should load the correct melting current, do not use a temporary fuse in case of
the broken circuit.
6. Connect the power wires correctly, make sure the instrument is grounded in case of
lightning stroke.
7. Use the dedicated electric wires.
8.
The halogen lamp can radiate UV light thus may cause a burn of eyes and skins. Do
not see through the light directly and take protective measures when using the
microscope as much as possible.
9. The product should store in a place with shelter and no acid gas, alkali, organic solvent
or any harmful substances around.
★ a 3-pin plug is reserved for the machine for safety concern , the machine is grounded
through the 3-pin plug. Do not use any other adapter plug or e the safety performance
may decrease.
★Do not put the instrument in a place where is hard to cut off the melting current.
★The protective offered by the device may be damaged if the device is not used in
the way indicated by our company.
Advertisement
Table of Contents
