Table of Contents
Advertisement
Transport handle
④
Mainframe
Pic.2
Assembly
1. Trinocular tube
①Use a 2mm hexagon screwdriver to loosen
Bolt of trinocular tube
the bolt, take out the dust cover.
②Calibrate the trinocular tube and the swallow
tail, fix it by 2mm hexagon screwdriver.
★Do hold the trinocular tube tightly in case
Trinocular tube
of fallen down.
Swallow tail of trinocular tube
Pic.3
2. Eyepiece and centering telescope
①Take off the dust cover, insert the 2 eyepieces into the tube(the eyepiece should fully
contact with the tube).
★②When observing with phase contrast, replace one eyepiece with the centering telescope,
make the phase contrast ring focusing accurately.
★when using centering telescope
Advertisement
Table of Contents
