4.2. Connect cables
Connect the cables to the connectors of this product.
When connecting the
connector, be careful
of its orientation.
(*1) Attach the FG cable before connecting the power cable to an outlet by referring to the
procedure on how to attach the FG cable described later in "Hardware Quick Reference."
(*2) When attaching or removing the connector, firmly hold the part of the connector
marked with an arrow.
(*3) Attach the power cable retention bracket before connecting the power cable to an outlet
by referring to the procedure on how to attach the power cable retention bracket
described later in "Hardware quick reference."
(*4) If you are using a 2-pin outlet with ground terminal, use a 2-pin conversion plug with a
ground wire supplied with this product(Only MI1002-W). Before attaching or removing
a ground wire to/from the ground terminal, be sure to unplug the plug from the outlet.
Connect the power
cable to the AC
Display device compatible with an HDMI interface
USB interface device (such as a hub)
1000BASE-T/100BASE-TX/10BASE-T interface device (such as a hub)
Device with a serial interface conforming to the RS-232C standard
Device with a serial interface conforming to the RS-485 standard
FG cable (accessory)
Then, connect the
power cable to an
Device to connect