EMC Directive and Low Voltage Directive
Since 1996, products to be released in the EU member states are legally obligated to prove that they
conform to the EMC Directive that is one of the EU directives. Since 1997, these products are also legally
obligated to comply with the Low Voltage Directive that is one of the EU directives.
For products admitted by the manufacturer that they comply with the EMC Directive and Low Voltage
Directive, the manufacturer must declare conformity and place a CE marking on the products.
The product sales director of this product within the EU is as follows:
Company name: MITSUBISHI ELECTRIC EUROPE B.V.
Address: Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
Requirements for complying with the EMC Directive
The EMC Directive requires products not to emit excessive electromagnetic waves to outside
(emission or electromagnetic interference) and also not to be affected by external
electromagnetic waves (immunity or electromagnetic susceptibility).
This product complies with the following standards.
For the methods to comply with the EMC Directive and to judge conformity of the mechanical device
equipped with this product, the manufacturer must make a final judgment.
Standards related to the EMC Directive
Requirements for complying with the Low Voltage Directive
The Low Voltage Directive directs that the necessary safety is ensured for equipment driven by AC 50 to
100 V or DC 75 to 1500 V power supply.
This section describes the cautions for using this product in accordance with the Low Voltage Directive.
The following description is created based on the regulatory requirements and standards that
MITSUBISHI ELECTRIC CORPORATION has obtained. However, MITSUBISHI ELECTRIC CORPORATION
does not guarantee that the entire mechanical device manufactured according to the following
description conforms to the Low Voltage Directive. For the methods to comply with the Low Voltage
Directive and to judge conformity, the manufacturer must make a final judgment.
Standard applicable to this product
EN60950-1 Information technology equipment - Safety - Part 1: General requirements
EN 55032:2012 +AC:2013
EN 61000-3-2:2014 (Class A)