Download  Print this page

Mitsubishi Electric MELIPC MI1002-W-CL User Manual page 10

Hide thumbs

Advertisement

Hold the plug part when removing the AC power cable.
Pull the plug by holding the plug part to disconnect the AC power cable. Pulling the AC
power cable out by the cable may cause breakage, resulting in electrical shock or fire.
Secure the AC power cable in place.
Be sure to secure the AC power cable in place. Incomplete insertion causes an
inadequate connection, which may result in heat generation or fire. Also, if dust
accumulates on the prongs and water drops adhere to the accumulated dust, it may
result in heat generation or cause fire.
Use the authorized AC power cable.
Use only the AC power cable supplied with the product(Only MI1002-W). Electric
current exceeding the rated flow could cause fire.(When using the MI1002-W-CL,
prepare a power cable that conforms to the power supply to be used and the safety
standards of the use area.) Also, observe the following precautions to prevent electrical
shock or fire caused by a damaged power cable.
●Do not stretch the power cable.
●Do not bend the power cable.
● Do not twist the power cable.
●Do not step on the power cable.
● Do not alter, modify, or repair the
power cable.
●Do not use a damaged power cable. (Replace the damaged power cable with a
power cable of the same standard. Contact your sales agent or a maintenance
service company for replacement.)
Do not use the attached power cable, AC adapter, 2-pin conversion plug with
ground wire, FG cable, and power cable clamp for any other devices or
usage.
The power cable(Only MI1002-W), AC adapter, 2-pin conversion plug(Only MI1002-W)
with ground wire, FG cable, and power cable clamp that come with the product are
designed for this product and the safety is confirmed for use with this product. Do not
use them for any other products or purposes. Doing so may cause a fire or an electric
shock.
Do not turn on the power again immediately after turning off the power.
If the power is turned on immediately after turning off the power, a large inrush
current may flow.
After turning off the power, wait 10 seconds before turning the power on again.
●Do not pinch the power cable.
●Keep chemicals away from the power
cable.
●Do not place any object on the power
cable.
● Do not use a rolled up power cable.
●Do not secure the power cable with
staples or equivalents.
viii

Advertisement

loading

This manual is also suitable for:

Melipc mi1002-w