Chapter 7 Connectivity
Establishing connection
Establishing connection
Via Bluetooth
The Bluetooth interface allows interface and file transfers.
It is an option that must be installed at the factory.
The product is approved in accordance to R&TTE directive
concerning transmitter module marked by CE0678. It is
manufactured by MITSUMI and it is an OEM product.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. This device contains FCC-ID: POOWML-C40.
Installing the Bluetooth option onto the SmartOTDR
The Bluetooth option is delivered on a USB dongle to be connected to the board which
will be inserted into the SmartOTDR.
To install the Bluetooth option onto the equipment:
1
Switch off the SmartOTDR and, if necessary, unplug it from mains.
2
Remove the cover on the underside of the Platform, unscrewing the two screws.
If the board is already set into the Platform, follow instructions on
3
Insert the board, pressing it gently but firmly, taking care to the connectors.
66
User Manual
7SMART102 Rev004
step
4.