Fig. 22
FiberCheck Probe components
Magnification
Control
Buttons on FiberCheck probe are also used to navigate onto the
screen of the product, if it is used alone, without being linked to a Plat-
form (see FiberCheck user manual).
Installation of tips
The Pass/Fail analysis function on the SmartOTDR can only be used with certain
inspection tips mounted on the P5000i.
Seven tips, patchcords and bulkheads types, are delivered with the Videoscope Kit
(ESDFSCOPE5Ki) but many others can be used.
Configuring the Scope
P5000i Scope connection
1
Plug in your Viavi scope into a USB port from the SmartOTDR.
2
Push the button Home
TM
Quickcapture
button:
- Adjust automatically the
image quality (auto-focus)
- Instantly captures (and
analyzes) fiber image
Focus Control
User Manual
Inspection tip
Barrel assembly
Quickcapture
- Adjust automatically the
image quality (auto-focus)
- Instantly captures (and
analyzes) fiber image
Turn on the Scope
7SMART102 Rev004
Chapter 6 Scope
Installation of tips
TM
button:
47