DFI FS053 User Manual page 31

3. Enter the command below, and substitute the argument <panel_name> with either of
the verified panels — AM-800480R3TMQW-T31H, or OT070UADDBT-00 — as shown in
the example below.
=> setenv panel <panel_name>
4. Enter the command below to save the changes.
=> saveenv
5. Restart the system, and the new settings will be applied. The software parameters will
then support the panel model inserted previously in step 3.
Appendix A - Compatibility
Appendix A
Method 2: shell script command after booting into OS
1. Power on the system and finish booting into the OS.
2. Execute the file panel.sh
sonnel for the executable file. When the prompt below shows up, insert either of the
verified panels — AM-800480R3TMQW-T31H, or OT070UADDBT-00.
3. Restart the system, and the new settings will be applied. The software parameters will
then support the panel model inserted previously in step 2.
31
— please contact your sales representative or DFI FAE per-
www.dfi.com