Download Uboot Images To Spi With Mfgtool - DFI FS053 User Manual

Download Uboot Images to SPI with MFGTool

1. First complete above "Download Images to eMMC with MFGTool" steps.
2. Set the finger switch SW5 to "Serial Downloader Mode": pins 7 on and 8 off.
ON
1 2 3 4 5 6 7 8
Boot Mode/Device Select
(SW5)
Pins 1, 2, 5, 6, 7 ON
3. Plug in the Micro USB cable to your PC and power-on the FS053.
Important:
The adapter output voltage is 9~36V for FS053.
Micro USB Cable
Chapter 3 Software User Guide
Chapter 3
+
-
23
4. Unzip Image package on your PC.
5-1. For Rev. A only
Yocto image: execute "\\[core type]\yocto-spi-fs053_[core
For example, for DualLite CPU, execute "\\DualLite_core\yocto-spi-fs053_DualLite-u-boot.vbs".
Android image: execute "\\[core type]\android-spi-fs053_[core
For example, for DualLite CPU, execute
"\\DualLite_core\android-spi-fs051_DualLite-u-boot.vbs".
5-2. For Rev. B only
Yocto image: execute "\\[core type]\yocto-spi-fs053_[core
For example, for Quad CPU, execute "\\Quad\yocto-spi-fs053_Quad-all.vbs".
Android image: execute "\\[core type]\android-spi-fs053_[core
For example, for Quad CPU, execute "\\Quad\android-spi-fs053_Quad-all.vbs".
Important:
Failure in loading a compatible image (i.e. Rev. A or Rev. B) onto the system may
result in malfunction and unexpected errors.
6. You will see the device connected as "HID-compliant device."
7. After all preparation is done, click "Start" to burn the file. Wait until the process ends.
type]-u-boot.vbs".
type]-u-boot.vbs".
type]-all.vbs".
type]-all.vbs".
www.dfi.com