DFI FS053 User Manual page 22

3. Unzip Image package on your PC.
4. Yocto image: execute "\\[core type]\yocto-emmc-fs053-[core
For example, for DualLite CPU, execute "\\DualLite_core\yocto-emmc-fs053-DualLite-all.vbs".
Android image: execute "\\[core type]\android-emmc-fs053-[core
For example, for DualLite CPU, execute
"\\DualLite_core\android-emmc-fs053-DualLite-all.vbs".
5. You will see the device connected as "HID-compliant device."
6. After all preparation is done, click "Start" to burn the file. Wait until the process ends.
Chapter 3 Software User Guide
Chapter 3
7. After the burning is done, click "Stop" and turn the power off.
type]-all.vbs".
type]-all.vbs".
8. Set the finger switch SW5 to the "eMMC Start Mode": pins 1, 2, 5, 6, 8 on and 3, 4, 7 off.
9. Power-on the device again to reboot it into the system.
22
ON
1 2 3 4 5 6 7 8
www.dfi.com