Lvds Lcd Panel Connector; Panel Backlight/Sata Power Connector - DFI FS053 User Manual

LVDS LCD Panel Connector

Panel Backlight/SATA Power Connector

5
1
Panel Backlight/SATA Power
The system board allows you to connect a LCD Display Panel by means of the LVDS LCD panel
connector and the Panel Backlight/SATA power connector. These connectors transmit video sig-
nals and power from the system board to the LCD Display Panel. Panel Backlight/SATA power
connector also supplies power to the SATA drive. Connect one end of the provided power
cable to the SATA power connector and the other end to your storage device.
Refer to the right side for the pin functions of these connectors.
Chapter 2 Hardware Installation
ON
1 2 3 4 5 6 7 8
1
14
LVDS LCD Panel
Chapter 2
LVDS LCD Panel Connector
Pin Pin Name Pin
GND 2
1
LVDS_CLK- 4
3
LVDS_Out3- 6
5
LVDS_Out2- 8
7
LVDS_Out1-
10
9
LVDS_Out0-
12
11
Panel Power 14
13
Note:
1. DFI board's LVDS connector:
Manufacturer: E-call
Part No.: 0110-3221140
Description: Wafer connector, 14 pin, 1.25mm (pitch), White, 3.45mm (height), SMT
type, 90 degree
2. DFI board's Panel Backlight/SATA power connector:
Manufacturer: E-call
Part No.: 0110-3221050
Description: Wafer connector, 5 pin, 1.25mm (pitch), 3.45mm (height), SMT type,
90 degree, White
3. DFI board's LVDS cable:
Manufacturer: Molex
Part No.: 51021-1400
Description: 1.25mm (pitch)
19
Panel Backlight/SATA Power Connector
Pin Pin Name
Pin Name
1 Panel Backlight/SATA Power (+5V)
GND
2
GND
LVDS_CLK+
Panel Backlight On/Off Control
3
LVDS_Out3+
Dimming Control
4
LVDS_Out2+
5 Panel Backlight/SATA Power (+5V)
LVDS_Out1+
LVDS_Out0+
Panel Power
www.dfi.com