Download Images To Sd Card With Mfgtool - DFI FS053 User Manual

8. After the burning is done, click "Stop" and turn the power off.
9. Set the finger switch SW5 to the "SPI Start Mode": pins 4, 5, 8 on and 6,7 off.
ON
1 2 3 4 5 6 7 8
10. Power-on the device again to reboot it into the system
Chapter 3 Software User Guide
Chapter 3

Download Images to SD Card with MFGTool

1. Set the finger switch SW5 to "SD Card Download Mode": pins 1, 3, 6, 7 on and 2, 4, 5,
8 off.
ON
1 2 3 4 5 6 7 8
2. Plug in the Micro USB cable to your PC and power-on the FS053.
Important:
1. The adapter output voltage is 9~36V for FS053.
2. Do not insert SD card before turning on the device power.
Micro USB Cable
24
+
-
www.dfi.com