Additional Settings - Siemens 7SR10 Argus Series Manual

Analog Inputs
Static (Steady-State) Object Number: 30
Change Event Object Number: 32
Analog Input Deadband: 34
Static Variation reported when variation 0 requested: 1 (32-Bit Analog Input with Flag)
Change Event Variation reported when variation 0 requested: 1 (32-Bit Analog Change Event w/o Time)
Analog Input Reporting Deadband Variation reported when variation 0 requested: 1 (16-Bit)
Point
Description
Index
192 Freq Last Trip
196 Frequency Max
197 S 3P Max
294 Ia THD
295 Ib THD
296 Ic THD
330 CB Trip Time Meter

5.4 Additional Settings

The following relay settings are provided for configuration of the DNP 3.0 implementation when available and are
common to all ports using this protocol.
Setting Name
Unsolicited
DISABLED, ENABLED
Mode
Destination
0 - 65534
Address
DNP3
Application 5, 6 ... 299, 300
Timeout
© 2018 Siemens Protection Devices
or 2 (16-Bit Analog Input with Flag)
or 3 (32-Bit Analog Input w/o Flag)
or 4 (16-Bit Analog Input w/o Flag)
or 5 (Single Precision, floating point Analog Input with Flag)
or 2 (16-Bit Analog Input w/o Time)
or 3 (32-Bit Analog Input with Time)
or 4 (16-Bit Analog Input with Time)
or 5 (Single Precision, floating point Analog Input w/o Time)
or 7 (Single Precision, floating point Analog Input with Time)
or 2 (32-Bit)
or 3 (Single Precision, floating point)
Default
Change Event
Assigned Class
(1, 2, 3 or none)
0,3
0,3
0,3
0,3
0,3
0,3
0,3
Range/Options
Chapter 4 - 7SR10 · Data Communications Definitions
Default Default
Variation Variation Default
Static Event Multiplier
Object 30 Object 32
5 7
2 4
2 4
2 4
2 4
2 4
2 4
Default Setting
DISABLED As Required
0 As Required
10s As Required
Default
Deadband
1.000 1.000
100.000 1.000
10.000 1000000.000
100.000 0.100
100.000 0.100
100.000 0.100
1000.000 0.010
Notes
Setting is only visible
when any port
Protocol is set to
DNP3.
Setting is only
visible when DNP3
Unsolicited Events
set to Enabled.
Setting is only visible
when any port
Protocol is set to
DNP3.
Chapter 4 - Page 65 of 78