Siemens 7SR10 Argus Series Manual page 232

Figure 1-2
Table 1-1 Recommended Terminal Lugs Specifications with Control Push Buttons
Terminal Blocks
Current Inputs (X5)
Voltage Inputs (X7)
Auxiliary Supply (X3)
Rear Communication
Port (X2)
Front
Communication Port
Binary Input (X1)
Binary Input (X6)
Binary Output (X4)
Ground Terminal
© 2018 Siemens Protection Devices Limited
Panel cut-out
Type/Cable Specifications
TE connectivity PIDG Series insulated
tin plated Crimp ring terminal, M3.5
Stud size, 2.6 mm² to 6.6 mm², 12 AWG
6 position, M3 screw-type plug-in
terminals suitable for 2.5 mm
3 position, M3 screw-type plug-in
terminals suitable for 2.5 mm
4 position, M2 screw-type plug-in
terminals suitable for 1.5 mm
USB, Type B
6 or 12 position, M3 screw-type plug-in
terminals suitable for 2.5 mm
6 position, M3 screw-type plug-in
terminals suitable for 2.5 mm
8 or 14 position, M3 screw-type plug-in
terminals suitable for 2.5 mm
Tin plated crimp ring Terminal, M3 stud
size, 4 mm² to 6 mm², 12 AWG to
10 AWG, Yellow
Manufacturer/
Part number
TE Connectivity Mfr. Part
No. 2-327960-1 or
equivalent
End sleeve
2
cable 3D-8011H or equivalent
End sleeve
2
cable 3D-8011H or equivalent
End sleeve
2
cable 3D-8009H or equivalent
Tyco/974329-1 or
equivalent
End sleeve
2
cable 3D-8011H or equivalent
End sleeve
2
cable 3D-8011H or equivalent
End sleeve
2
cable 3D-8011H or equivalent
RS Stock No. 613-9334 or
equivalent Mfr. Part no.
RVY5-3.2
7SR10 Installation Guide
Chapter 5 Page 4 of 13