Safety Symbols
For safety reasons, the following symbols are displayed on the 7SR10 Argus Overcurrent relay.
For safety reasons the following symbols are displayed on the fascia.
Caution: Refer to Equipment Documentation
Caution: Risk of Electric Shock
©2018 Siemens Protection Devices Limited
Figure 2-3
Relay Rating Label
Figure 2-4
Fascia Relay Rating Label
Dielectric test voltage 2kV
Impulse voltage withstand 5kV
"WEEE" Symbol instructions.
The product should not be disposed with other wastes at the end of its working
life. Please separate the product from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. This will
help prevent harm to the environment or human health from uncontrolled waste
disposal.
Figure 2-5 Safety Symbols
7SR10 Description of Operation
Chapter 1 Page 18 of 77