At Command - Queue Parameter Value Frame - 0X09; At Command Response Frame - 0X88 - Digi XBee User Manual

API operation
Frame data fields
Start delimiter
Length
Frame type
Frame ID
AT command
Parameter value
Checksum

AT Command - Queue Parameter Value frame - 0x09

Description
This frame allows you to query or set device parameters. In contrast to the AT Command (0x08)
frame, this frame queues new parameter values and does not apply them until you issue either:
The AT Command (0x08) frame (for API type)
n
The AC command
n
The device returns register queries immediately and not does not queue them.

AT Command Response frame - 0x88

Description
A device sends this frame in response to an AT Command message. Some commands send back
multiple frames (for example, the ND (Node Discover) and AS (Active Scan) commands). These
commands end by sending a frame with a status of ATCMD_OK and no cmdData.
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications.
Frame data
fields
Frame type
Frame ID
1
M was arbitrarily selected.
XBee/XBee-PRO S1 802.15.4 (Legacy) User Guide
Offset Description
4 0x88
Identifies the data frame being reported. If set to 0, the device does not
5
send a response.
Offset Example
0 0x7E
MSB 1 0x00
LSB 2 0x08
3 0x08
4 0x4D (M)
5 0x44 (D)
6 0x4C (L)
7-10 0x00000FFF
11
0x0C
API types
1
API frame
91