Errors And Warnings; Status Information; Network; Clear System Memory - EWM Expert XQ 2.0 Operating Instructions Manual

5.4.8.4

Errors and warnings

A list of all ewm Xnet-specific errors and warnings are displayed with their ID number and description.
5.4.8.5

Status information

5.4.8.6

Network

5.4.8.7

Clear system memory

Resets the internal system memory used for saving welding and log data and deletes all data.
All welding data recorded so far, which have not been transferred to the Xnet server via flash
drive or network connection, will be permanently deleted.
5.4.8.8

Reset to factory settings

All machine configuration data relating to Xnet will be reset to the factory setting. The system memory da-
ta will not be affected, i.e. any welding or log data recorded will be saved.
099-00L105-EW501
07.06.2019
Operating the machine control
Figure 5-11
Figure 5-12
Offline data transfer (USB)
35