Maintenance Of The Fa 500.3 Shredder; Lubricating The Drive Chains And Synchronized Wheels (2 X Per Year) - HSM SP 5080 Operating Manual

5.3

Maintenance of the FA 500.3 shredder

5.3.1

Lubricating the drive chains and synchronized wheels (2 x per year)

- Turn off the main switch and disconnect the red CEE power plug
- Remove the inspection fl aps (1) in the left and right side plates.
Take out the Allen screws (2).
- Lubricate the drive chain of the motor and cutting unit, the drive chain of the
cutting unit and feed belt, and the synchronized wheels.
Recommended lubricant: K2K in accordance with DIN 51502/DIN 51825
- Mount the inspection fl aps onto the unit again.
04/2013
1
2
2.990.999.120_en
SP 5080
49