Shredder Control Panel; Display: Baling Press Not In Automatic Mode; Display: Status Of The Baling Press - HSM SP 5080 Operating Manual

4.2

Shredder control panel

Display: Door open or
emergency stop activated
Display: Level 1
overload
No function
4.2.1

Display: Baling press not in automatic mode

This symbol lights up red, if the press is not in automatic mode.
4.2.2

Display: Status of the baling press

This symbol lights up
green, whilst the press is in automatic mode.
yellow, when the bale is ready for strapping.
red, if a malfunction occurs in the baling press.
34
1
Note
The shredder can only be operated, whilst the press is in
automatic mode.
2.990.999.120_en
SP 5080
R button:
Cutting unit runs in reverse
Display: Status of the
baling press
Display: Oil reservoir empty
Function button
"On / off / start"
Display: Level 2 * overload
2
No function
Z
Display: Ready for operation
04/2013