Assembling The Shredder Press Combination - HSM SP 5080 Operating Manual

3.8

Assembling the shredder press combination

04/2013
Danger!
Open shearing point, blade rollers.
Risk of fi ngers and hands being severed.
Neither the shredder nor the combined press may be switched on before
both devices have been properly connected and bolted together!
S
A
2.990.999.120_en
SP 5080
1. Remove the 2 cross braces (S) on the
shredder and lock the roller brakes on the
press.
2. Push the shredder over the press from
behind.
3. Insert the plug of the connection cable into
the socket of the shredder and lock the
plug in position.
4. Carefully push it forward until the dis-
charge chute of the shredder touches the
press hopper. Take care with the cable
whilst doing so.
5. If the Shredder cannot be completely
pushed up against in the press hopper, the
cover (A) must be loosened and subse-
quently retightened.
6. Bolt the shredder and the baling press
together using the 4 nuts.
23