Oil Reservoir Empty; Stopping The Machine; Outdoor Use - HSM SP 5080 Operating Manual

Channel baling press
Hide thumbs Also See for SP 5080:
Table of Contents

Advertisement

4.7.4

Oil reservoir empty

"Oil reservoir empty" display lights up blue.
-
Refi ll the the cutting block special oil.
Order no. 1.235.997.500 for a 5 l container
After the reservoir is fi lled, the "Oil reservoir empty" signal is automatically
deactivated.
4.8

Stopping the machine

-
Run the machine into the initial position (with the press ram at the rear).
-
Switch off the main switch of the shredder and of the press
-
Secure the main switches against restarting
-
Unplug the red CEE power plug
4.9

Outdoor use

See also the "Siting the machine" section
04/2013
Note
The shredder remains operational even when the oil reservoir is empty.
Warning!
For reasons of safety, only operate under supervision. The operator
must ensure that unauthorized persons do not have access to the ma-
chine.
When the machine is not being used, it must be shut down and
secured against unauthorised use.
2.990.999.120_en
SP 5080
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents