Bbmd Configuration - Carrier 30XW User Manual

4.8 BBMD configuration

The BACnet BBMD screens allow the user to configure the BACnet BBMD function. BACnet
BBMD gives the user the possibility of choosing BACnet device type.
BACnet BBMD device types are as follows:
 Single device: No particular BACnet BBMD configuration.
 Foreign device: BACnet device that is alone on a network (Foreign device) and that
is linked to a BACnet BBMD device located on another network.
 BBMD device: BACnet device on a network (containing many other BACnet devices)
and that is configured as BBMD device. It is linked to another BACnet BMD device
located on another network.
After choosing the correct BACnet BBMD device type, the user can configure this device
via BBMD configuration screens:
• Single device: No IP address/mask/port configuration.
• Foreign device: IP address/mask/port of the BACnet BBMD device linked to the
current foreign device.
• BBMD device: 10 IP address/mask/port configurations corresponding to 10
possible BBMD devices
Back to Beginning of Chapter – Table of Contents
ECG–UG–14-002
30XAXW
BACnet Option
REVISION
Rev G March 2017
DATE PAGE
36 OF 56