Bacnet Opc-Server Troubleshooting; Bacstac Installation Error - Carrier 30XW User Manual

8 BACNET OPC-SERVER TROUBLESHOOTING

8.1 BACstac installation error

The following BACstac installation error may occur at BACstac installation and/or at
BACnet OPC server start-up.
CAUSE: BACnet stac Router may be missing in the installation package.
SOLUTION: To fix the BACstac installation problem, check whether the BACstac
Router in visible in the list of aplications in Control Panel.
To verify whether the BACstac OPC-Server application is installed:
1. In Control Panel, click "Programs and Features".
2. The list of all programs installed on the computer is displayed.
3. Find "BACstac Router".
4. If the BACnet stac router is missing, (re)install BACnet OPC-Server application
from MBS CD or use the 7.1.0.3 release version (16.4 MB).
Back to Beginning of Chapter – Table of Contents
ECG–UG–14-002
30XAXW
BACnet Option
REVISION
Rev G December 2016
DATE PAGE
55 OF 56