Main Frame L Assy - Brother HL-L2300D Service Manual

9.21 Main Frame L ASSY

(1) Remove the two taptite bind B M4x12 screws, and remove the front chute ASSY.
(2) Release the LVPS harness from the securing fixtures.
(3) Remove the regist FG spring from the motor drive sub ASSY and the conductive
bushing 5.
(4) Use a flat-blade screwdriver or similar tool to release the hook from the hole, and
remove the conductive bushing 5.
(5) Release the hook, and remove the feeder gear 34.
Motor drive sub ASSY
Regist FG spring
Taptite bind B M4x12
Harness routing: Refer to
Feeder gear 34
Hook
Hole
Conductive bushing 5
<Front side>
Front chute ASSY
Fig. 3-41
"4. Left side of the
3-40
Regist FG spring
Hook
machine".
Conductive bushing 5
<Upper side of frame L>
Confidential