Brother HL-L2300D Service Manual page 62

 Error code 9002
Size Mismatch
Load paper and press Go.
When printing from the paper tray, the size of paper set in the paper tray does not match the
size specified by the driver.
<User Check>
• Change the driver setting to be matched with the size of the paper set in the paper tray.
Step
Registration rear actuator
1 caught in some sections of the
machine
Registration rear sensor failure
2
Main PCB failure
3
 Error code 9302
No Paper
Load paper.
When printing from the paper tray, the paper feed sensor detected that there was no paper
set in the paper tray.
<User Check>
• Set paper in the paper tray.
Step
Connection failure of the paper
1
feed sensor harness
Paper feed actuator caught in
2
sections of the machine
New toner sensor PCB failure
3
Panel PCB failure
4
Main PCB failure
5
 Error code 9701
Size Error DX
Press Go for 2 seconds. Specify the correct paper and load the same size paper as
the Printer driver setting.
A tray set to duplex printing-incompatible size was specified in duplex printing.
<User Check>
• Specify A4 or Letter size paper in the driver and set paper with the same size to the
specified paper tray.
Step
Main PCB failure
1
Cause
Reattach the registration rear actuator.
Replace the registration front/rear actuator
holder ASSY.
Replace the main PCB ASSY.
Cause
Reconnect the paper feed sensor harness
ASSY.
Reattach the paper feed actuator.
Replace the new toner sensor PCB ASSY.
Replace the panel PCB ASSY.
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-44
Remedy
Remedy
Remedy
Confidential