Brother HL-L2300D Service Manual page 35

First line
Jam Tray 1 Remove the jammed
paper from Tray 1.
Manual Feed Load paper.
Machine Error ** ―
No Access Point ―
No Paper Load paper.
No Toner Open the Front Cover,
then install the Toner
Cartridge.
Out of Memory Press Go for 2
seconds.
Print Overrun ―
Print Unable **
Replace Drum ―
Replace Toner Open the Front Cover,
replace Toner
Cartridge.
―
Second line
When printing from the paper tray,
the registration front sensor does
not detect paper pass within the
specified time after the paper feed
sensor detected paper pass.
There is no paper set in the
manual feed slot on the manual
feed slot fix mode.
A machine error occurred. Refer to
error code "**".
Cannot find the connectable
access point.
When printing from the paper tray,
the paper feed sensor detected
that there was no paper set in the
tray.
The new toner sensor detected
that the toner cartridge was not
set.
There is insufficient memory to
expand PC print data.
First side printing started before
finishing receiving the second side
data in duplex printing mode due
to the insufficient memory.
Printing related error. Refer to
error code "**".
The number of rotations of the
drum unit has reached the upper
limit. (Printing does not stop.)
Dot count or develop roller counter
of the toner has reached the upper
limit in the toner stop mode.
Dot count or develop roller counter
of the toner has reached the upper
limit in the toner continuous
printing mode.
2-17
Description
Error Refer
codes to:
7300 2-40
8C00 2-43
---
--- 4.5.2
9302 2-44
6101 2-36
C700 2-45
8000 2-42
--- ---
4200 2-33
4C01 2-34
4D01 2-34
Confidential