Fuser Unit - Brother HL-L2300D Service Manual

9.10 Fuser Unit

(1) Release the fuser unit heater harness from the securing fixtures, and disconnect it from
the LVPS-heater harness.
Fuser unit heater harness
LVPS-heater harness
Harness routing: Refer to
(2) Disconnect the center thermistor harness ASSY and the side thermistor harness ASSY
from the eject sensor PCB ASSY.
(3) Release the center thermistor harness ASSY and the side thermistor harness ASSY
from the securing fixtures.
<Back side>
Harness routing: Refer to
Assembling Note:
* Center thermistor has a black and blue connectors. (230V models only)
The black connector may be connected to the blue insertion port and vice versa.
Fig. 3-19
"5. Rear side of the machine".
Fig. 3-20
"5. Rear side of the machine".
3-25
<Back side>
Side thermistor
harness ASSY
Center thermistor
harness ASSY*
Eject sensor PCB ASSY*
Confidential