Table of Contents
Advertisement
User's Manual
Figure 7-3:
Click OK and check for the following:
•
Make sure the fieldbus device or segment is powered either by an external
source or by the USB Fieldbus Interface. For more information, see
Section
•
Make sure drivers are installed and that the hardware is ready for use.
•
Check that there are no loose connections and that the USB cable does not
exceed 2 meters in length.
•
Make sure the USB FF HSE Server is running.
46
No device detected dialog
2.3.
January 2019
Advertisement
Table of Contents
Need help?
Do you have a question about the USB Fieldbus Interface and is the answer not in the manual?