Emerson USB Fieldbus Interface User Manual page 11

January 2019
USB 1.1 or USB 2.0 port
3.2 Install the USB Fieldbus Interface Configuration utility
Notes
• Do not connect the USB Fieldbus Interface to the computer or to a
fieldbus device or segment until software installation is complete.
• You may be prompted to determine the operating system and the
Windows version (32-bit or 64-bit) running on your computer. Keep this
information handy.
• For installation purposes, the user must use the Administrator account.
1. Insert the USB Fieldbus Interface installation CD/DVD.
Software and driver installation should start automatically.
If AutoRun is not enabled, double-click setup.exe.
2. Follow the prompts on the installation window.
3. Click Finish.
3.3 Install the Communication DTM software
1. Insert the USB Fieldbus Interface installation CD/DVD.
2. Navigate to the Emerson USB Fieldbus Interface DTM folder and double-
click Setup.exe.
3. Click Next and follow the prompts on the installation window.
User's Manual
11