Using With Ams Device Manager - Emerson USB Fieldbus Interface User Manual

January 2019
5

Using with AMS Device Manager

Topics covered in this chapter:
• Add a network component in AMS Device Manager
• Configure fieldbus devices in AMS Device Manager
AMS Device Manager provides a single application for predictive diagnostics,
documentation, calibration management, and device configuration. Using
AMS Device Manager gives you better visibility into the assets in your plant,
resulting in faster startup and increased availability through more cost-
effective maintenance and improved asset performance.
Contact your Emerson Sales/Support representative for more information on
AMS Device Manager.
5.1 Add a network component in AMS Device Manager
An FF HSE network component is required to use the USB Fieldbus Interface
with AMS Device Manager.
Notes
• If there is an existing FF HSE network configured for another fieldbus
device, you do not need to add a new FF HSE network component.
• You must have an updated license file that includes an HSE license. The
HSE license enables you to add an FF HSE network component in AMS
Device Manager.
If you do not yet have an HSE license, contact your Emerson sales
representative and place an order for part number AW7060HSE.
1. Click Start > All Programs > AMS Device Manager > Network Configuration to open
the AMS Device Manager Network Configuration utility.
2. Click Add.
User's Manual
25