Emerson USB Fieldbus Interface User Manual page 41

January 2019
Note
The device address and Node ID should match. The device address is set
and can be found in the USB Fieldbus Interface Configuration utility. For
more information on setting the device address, see
10. Right-click HOST PC and click Connect.
Figure 6-10:
This connects all devices under the host PC. You can also opt to select
each device you want connected and click Connect.
Connected devices appear in bold face type in the menu tree.
11. Right-click the fieldbus device you want to configure and click Parameter.
Connect devices
User's Manual
Section 4.4.
41