Emerson USB Fieldbus Interface User Manual page 34

User's Manual
Figure 6-1:
3. Click Yes when prompted to create a new PACTware device catalog.
4. Close the device catalog when done.
6.3 Configure fieldbus devices in an FDT Frame Application
Notes
• Install the Communication DTM software and the DTM Library first before
configuring fieldbus devices in an FDT Frame Application. For more
information, see
• If necessary, update the DTM library. For more information, see
Section
• Make sure the USB Fieldbus Interface and fieldbus devices are correctly
set up and that the USB Fieldbus Interface Configuration utility is installed
and running. For more information, see
1. Launch PACTware.
2. From the Project pane, right-click HOST PC and click Add device.
34
Update device catalog
Section 3.3
6.2.
and Section 3.4.
Section 3.5
January 2019
and Chapter 4.