Chapter 11: Bios Updating Procedure; Introduction; Prerequisites - NCR RealPOS 72XRT POS User Manual

BIOS Updating Procedure
Chapter 11:

Introduction

The BIOS is located in the Serial Peripheral Interface (SPI) chip on the processor board.
This chapter discusses procedures on how to update the terminal SPI and/or BIOS. The
update software is distributed via the NCR Website.
The BIOS update can be performed using the following methods:
• Bootable USB Memory Device
• Network - Refer to the NCR Retail Systems Manager (RSM) Software User's Guide,

Prerequisites

The following are required to perform a SPI/BIOS update.
• USB Keyboard
• BIOS Software. Download from the NCR website:
(B005-0000-1518) for information about this procedure.
http://www.ncr.com
1. At this site, select the Support tab.
2. Select Drivers and Patches
SelfServ Terminal and Operating Systems
NCR RealPOS 72XRT (7616)
3. Select the desired BIOS File.
• Network Image - Used with Network boot
• USB Memory Key Image - Used with USB boot device
4. Save the software to your local hard drive.
Retail Support Files
→
→
→ BIOS.
NCR RealPOS and
→