Table of Contents
Advertisement
BIOS Updating Procedure
Chapter 6:
Introduction
This chapter discusses procedures on how to update the terminal BIOS. The software is
distributed via the NCR Website.
The BIOS update can be performed using the following methods:
• Bootable USB CD Drive
• Bootable USB Memory Device
• Network - Refer to the NCR Retail Systems Manager (RSM) Software User's Guide,
Prerequisites
The following are required to perform a SPI/BIOS update.
• USB Keyboard
• BIOS Software. Download from the NCR website:
(B005-0000-1518) for information about this procedure.
http://www.ncr.com
1. At this site, select the Support tab.
2. Select
Drivers and Patches
NCR RealPOS and SelfServ Terminal and Operating Systems
NCR RealPOS XR6 Rel. 1.0 (7603-1xxx)
3. Select the desired BIOS File.
• ISO Image - Used with CD ROM boot device
• Disk Image - Used with Floppy Disk boot device
• Network Image - Used with Network boot
• USB Memory Key Image - Used with USB boot device
4. Save the software to your local hard drive.
>>
Retail Support Files
>>
BIOS.
>>
>>
Hide quick links:
Advertisement
Table of Contents
