NCR RealPOS 72XRT POS User Manual page 172

12-160
8. At the prompt, insert the CD containing the operating system image (disk 1 if OS
9. Press
8) Write zeros to drive before restore: no
9) RAID - restore to 2nd drive: none
10. At the following prompt replace the CD with the next CD. Press
11. Repeat the previous step for each CD as required.
12. Remove the last CD before the system reboots.
13. Complete the OS installation as required per OS.
occupies more than one disk). Wait until the LED on the DVD drive stops blinking
and then press [Enter].
[A] at the following prompt to accept the arguments and to begin the restore
process. Press [Enter].
or
Press [9] if you are recovering a dual drive system that is configured in a RAID. A
menu of the available drives is displayed. Select the secondary (RAID) drive.
Confirm Pending Operation
Mode is: restore
2) Drive is: USB/SATA Storage A Size: 250GB
3) Directory path is: /Images/
4) Filename is: nnnnnaaa
5) Reboot after operation complete: yes
6) Resize last data partition if possible: no
7) Resize last data partition to: Full Disk
A) Accept these arguments
V) View OS Documentation
Q) Quit and reboot
Automatic mount
+------+
|--------------------------------|
| Please, press "ok" to mount ---|
| [/dev/cdrom] on [mnt/cdrom] ---|
|--------------------------------|
|--------------------------------|
|------------+----+--------------|
Ok
|------------|
|------------+----+--------------|
|--------------------------------|
+--------------------------------+
Note:
The process automatically repeats for the secondary drive if the RAID option
was selected above.
+------+
|--------------|
Operating System Recovery
[Enter] to continue.