Configuring AMT
Logging onto the Terminal Using AMT
After configuring the 7616 you should now be able to log into it from a browser on a
remote PC.
1. Determine the target terminal's IP address.
2. Open the browser on the PC.
3. Enter the IP address in the Address line. Include the 16992 port.
4. The AMT logon screen will appear if you are successful. Select the Log On button to
Windows:
Start → All Programs → Accessories → Command Prompt
Enter
ipconfig
and press [Enter]. The IP address is displayed.
Linux:
Switch Focus to the Instructions window.
Enter
and press [Enter]. The IP address (Inet adder) is displayed.
ipconfig
http://<IP Address>:16992
Note:
The 16992 port number is fixed and cannot be changed.
log onto the terminal.
6-87