Os Recovery Procedures For Windows 7/Posready 7 - NCR RealPOS 72XRT POS User Manual

Operating System Recovery

OS Recovery Procedures for Windows 7/POSReady 7

The NCRImageX Deployment/Capture Utility application is used to deploy and capture
Windows images. It is available on a bootable DVD along with the operating system
image.
Note:
should change the system back to a non-RAID configuration before performing the OS
recovery. After recovering the primary disk you can then re-configure the RAID.
1. Connect a keyboard to the terminal.
2. Insert the imaging utility DVD into the DVD drive (USB Flash Drive for 64-Bit)
3. Apply power to the terminal.
4. Press
5. Select
6. You should see a message during boot, indicating that the device has been
7. The Options Menu displays the available operating systems on the media. Verify it is
If you are recovering a dual drive system that is configured as a RAID you
[F8] during boot (when you see the NCR logo) to enter the Boot Select menu.
USB:[name of
recognized.
the correct OS and then select Next.
device].
12-161