Maintenance
MSR Cleaning Procedures
MSR Cleaning Cards and MSR Treatment Cards may be purchased from NCR or KIC
Products. For details, see
MSR Cleaning and Treatment Cards
Part
MSR Cleaning Card, Dry
MSR Cleaning Card, Wet
MSR Treatment Card
MSR Treatment Card
The MSR Treatment Card is used to assist in protecting Magnetic Stripe Readers from
Electrostatic Discharge (ESD), which can cause failures when swiping cards that have
metallic hologram stripes.
Swipe the card through the MSR in a smooth motion. Only swipe it down ONCE and
up ONCE. Allow the device to dry for 5 minutes before swiping any other cards.
Note:
used only once. Thus, a single card can treat 6 MSR devices with one UP and one
DOWN swipe per MSR device. These limits should not be exceeded due to the
possibility of spreading contaminants from machine to machine and/or reducing ESD
protection.
Note:
sealed (Ziploc) bag for future use.
http://www.ncr-direct.com
Each long side of the card may be used twice. Each short side of the card may be
If all six up/down swipes are not used on a fresh card it should be placed in a
Part Number
520522 (box of 50)
9436-2446 (box of 20)
http://www.kicproducts.com
or
NCR Part Number
998-0052929
603-9014730
497-0453056
15-189
.