Sony PCS-G70 Operating Instructions Manual page 24

System Connection via an ISDN
Notes
• Do not connect/disconnect the camera cable or the interface cable with the power on.
Doing so may damage the Camera Unit, Communication Terminal or ISDN Unit.
• Used with an ISDN Unit for the first time, the Communication Terminal may
automatically upgrade the software of the ISDN Unit. While the upgrading message
is displayed on the monitor screen, be sure not to turn off the Communication
Terminal. Doing so may cause malfunction of the system.
TERMINAL VISCA OUT
to TERMINAL
Camera cable*
PCS-PG70/PG70P
Communication
Terminal
MCU VIDEO OUT
1 2 3 4 5
DC 19.5V
IR OUT
AUX CONTROL
1 2 CTRL-S
to
AUDIO
OUT
to DC19.5V
Audio cable*
* supplied
** not supplied
Notes
• If you are only using one camera, be sure to connect it to the MAIN CAMERA connector.
• The AUDIO OUT (MIXED) jack is used to make an audio recording of a conference.
This is not used during regular conferences.
24
System Connections
PCSA-CG70/CG70P
Camera Unit
to TERMINAL
Interface cable (supplied
with ISDN UNIT)
to MAIN
CAMERA
AUDIO OUT AUDIO IN MAIN SUB
(MIXED) AUX LINE CAMERA AUX IN CAMERA
MIC
(PLUG IN POWER)
1 2
WHITE 100BASE-TX/
1 2
BOARD 10BASE-T
EC-MIC RGB OUT DSB
1 2
AUX MONITOR
VIDEO OUT
to VIDEO OUT
MONITOR 1
S-video
cable*
TV monitor**
to
S-video
input
to audio input
ISDN Unit
PCSA-B384S ISDN Unit**
to ISDN 1-3
PCSA-B768S
ISDN Unit**
to ISDN 1-6
to ISDN
UNIT
ISDN modular cable**
AUX IN
ISDN UNIT
PCS-AC19V6
AC adaptor
**
PSCA-PRI
ISDN Unit**
to ISDN PRI
Power cord*
to a wall outlet
to a wall outlet