Preparing For An Encrypted Videoconference Via Lan - Sony PCS-G70 Operating Instructions Manual

Preparing for an Encrypted
Videoconference via LAN
To start an encrypted videoconference, each terminal has to set the same
password and set "Encryption via LAN" to "On" in the LAN Setup menu.
Encryption via LAN
Page:
Encryption via LAN
Encryption Password
1
Enter a password using 13 to 20 alphabetical characters, numbers, or
symbols.
2
Select "On" for "Encryption via LAN" in the LAN Setup menu.
For details on setting, see "Encryption via LAN Page 1/1" on page 63.
Notes
• If you set "Encryption via LAN" to "On", you cannot connect to a terminal that is not
equipped with the encryption feature to a terminal with "Encryption via LAN" set to
"Off", or to a terminal without the same password as that of your system.
• You can conduct a videoconference without an encryption feature with a terminal
connected via an ISDN even if you set "Encryption via LAN" to "On".
160

Preparing for an Encrypted Videoconference via LAN

LAN
1/1
On
Save Cancel