Sony PCS-G70 Operating Instructions Manual page 205

The following messages indicate the state of the system. No action is required.
Message
Meeting starts!
Starting connection.
Meeting ends.
Please wait.
Installation completed.
The still image has been sent.
Still image transmission
cancelled.
Preset 1 (–6) selected.
Still image saved to Memory
Stick.
Registered to Preset number 1 (–
6).
Terminal A (or B, C, D, E) has
disconnected.
Site A (or B, C, D, E) has
disconnected.
The still image from the object
input has been transmitted.
The slide show is over.
The 1st (–5th) position has been
selected.
The terminal participated in the
conference.
The terminal has dropped out of
the conference.
Viewing the terminal. [Terminal
name]
Now upgrading. Wait for a while.
Be sure not to turn off your system
while upgrading.
Cascade connection is complete.
Cascade connection has been
made. Split mode is not available.
Use of the Private Phone Book is
available.
Meaning
Connection with the remote party has been completed, and
you can now start a conference.
After receiving a call from the remote party the system starts
connecting.
Operations for ending the conference have been completed.
The data is being saved.
Installing the software is completed.
A still picture has been transmitted to the remote party.
Transmission of a still image has been cancelled.
The camera angle and zoom setting has been changed to that
registered in Preset number 1 (–6).
The still image has been saved to the "Memory Stick".
The camera angle and zoom setting has been registered in
Preset number 1 (–6).
During a multipoint videoconference the remote party A (or
B, C, D, E) has been disconnected.
During a multipoint videoconference the remote party A (or
B, C, D, E) has ended the conference.
The still image input from the Document Stand has been
transmitted.
The slide show has been ended.
The terminal on the 1st (–5th) site for a multipoint
videoconference has been selected from the Phone Book.
The remote party of the displayed terminal participates in the
multipoint videoconference.
The displayed terminal ends the multipoint videoconference.
The picture of the displayed terminal can be seen on the
screen.
The software is now upgrading. Be sure not to turn off the
Communication Terminal until the upgrading is complete.
Doing so may cause malfunction of the system.
Cascade connection with the terminals has been completed.
Cascade connection with the terminals has been made. You
cannot display split windows.
The "Memory Stick" in which the Private Phone Book is
registered has been inserted into the Communication
Terminal. You can use the Private Phone Book.
On-screen Messages
205