Using Multiple Monitors; Using Two Monitors-Dual Monitor Setup - Sony PCS-G70 Operating Instructions Manual

Using Multiple Monitors

By connecting several monitors to the system, you can display different
material, such as video or still images, on different monitors.
Using Two Monitors–Dual Monitor Setup
By connecting two monitors, you can use one as a video-only display.
To connect a second monitor
To connect a second monitor, simply connect it to the VIDEO OUT
MONITOR 2 or RGB OUT connector of the Communication Terminal, or the
RGB OUT connector of the Data Solution Box.
If your second monitor is a Sony monitor, connect the supplied IR repeater
immediately under the monitor's remote sensor, and connect the other end of
the IR repeater cable to the IR OUT 2 connector of the Communication
Terminal.
First monitor
IR repeater
(supplied)
to IR out 1
to IR out 2
122
Using Multiple Monitors
S-video cable (supplied)
to S-video input
to audio input
Audio cable
(supplied)
to to VIDEO
AUDIO OUT
OUT MONITOR 1
to VIDEO
OUT
MONITOR 2
Signal cable
(not supplied)
S-video cable
(not supplied)
IR repeater (supplied)
Additional monitor A
(projector, etc.)
PCSA-DSB1S Data Solution
Box (not supplied)
to DSB
to RGB OUT
Additional monitor B
(projector, etc.)
Additional monitor C
to S-video input
under the remote sensor